Midland BT Next Conference, Инструкция по эксплуатации

Страница: 27 / 146

26 - Midland BT Next
UK
How to pair the BT Next Conference to a Phone
To pair the BT Next C. to a Phone, you must first enter the setup mode:
1. Turn off the unit
2. Press and hold down the middle button about 7 sec., until the Red light is on
permanently.
3. Now press for 3 seconds the “” or “Volume -” button, the Blue and Red
light will flash.
4. Enable the Bluetooth device search feature on your mobile phone
5. After some seconds, “Midland BT NEXT” will be displayed on your mobile phone.
Follow the pairing procedure of your Phone. If a pin code is requested you must
enter “0000” (four time zero).
When successfully paired, the Blue light of the unit will be on for one second and
than the unit will exit the setup mode and switch to the working mode (the Blue
light will start flashing).
You can use now your BT Next C. together with the Phone.
How to use a Phone
After pairing your phone to the BT Next C. unit you must switch to the “Phone” mode
in order to use it. Press the middle button until you hear “Phone” from the voice an-
nouncement. Now all the three main buttons are dedicated to the phone (see Table B)
Answering a call
When you hear the phone ring, you can answer in two different ways:
Vocally
:
Simply say one word to answer the call and start talking.
Manually:
Tap the “Forward” button and start talking.
Rejecting a call
If you don’t wish to answer, you can let the mobile phone ring or press the “Forward”
button for 3 seconds (you will hear one audio confirmation tone).
Making a call
There are several ways to make a call.
From the mobile keypad:
Dial the number on the mobile keypad:
Press “Send” on the mobile phone.
To redial the last number:
Phone on Vol+:
Press“Forward”button for 3 seconds in order to redial the last number
(you will hear one audio confirmation tone).
Phone on Vol-:
Press“Backward”button for 3 seconds in order to redial the last num-
ber (you will hear one audio confirmation tone).
To make a voice call:
Phone on Vol+:
Briefly press“Forward”button. If your mobile phone supports voice
calls, you will be asked to speak the name of the contact you wish to call.
Phone on Vol-:
Briefly press“Backward”button. If your mobile phone supports voice
calls, you will be asked to speak the name of the contact you wish to call.
Priority
: Calls have a high priority, which means that all other communications are
temporarily disabled when a call arrives.
Ending a call
There are several ways to end a call:
›
Wait for the called person to end the call.
›
Press the “Forward” button (you will hear an audio confirmation tone).
›
Press “End” button on the mobile phone.
Using the MP3 player feature of the mobile phone
The mobile phone, when paired on “” can be used as stereo MP3 players.
The BT Next C. device fully supports the A2DP and AVRCP protocols that enable you
to listen to stereo music and remotely control your mobile phone’s MP3 player. You
can even use the buttons on the BT Next C. unit to control the following play options:
Play, Pause, Forward and Backward.
B-Phone mode
Mode
Forward button (Phone on Vol+) Middle button Backward button (Phone on Vol-)
Phone Short press:
Voice dial /accept or close if it
is in progress
Long press:
redial last number/ or reject
Long press:
Change mode
Short press:
Voice dial /accept or close if it
is in progress
Long press:
redial last number/ or reject
Phone
(when music is plaing
and paired on “Vol +”)
Short press: Forward the song
Short press:
Play/pause
Long press:
Change mode
Short press:
Backward the song