6
If the driver wants to exclude the passenger before fi nishing the
conversation, he will shortly press again the
Intercom
button of his
device.
Handling calls
(only from the driver unit)
Certain advanced features of Midland BT Intercom are accessible
to phones equipped with the hands-free profi le. Check your
phone’
s
manual to fi nd out if it supports this kind of profi le.
Initiating calls from the phone’s keypad
a. Dial the phone number on the keypad of your phone.
b. Press “
Talk
” or “
Send
” on your phone to dial the number.
Voice dialling
Make sure your phone is on but no call is in progress.
Tap the
CTRL
button and listen for a tone. Now pronounce the name
of the party you want to call and wait for feeback from the phone. The
type of feedback depends on your phone.
The best performances of this function will depend on the type of
helmet you use (close or open) and on the speed. Make some tests
in order to fi nd the optimal condition.
Answering calls
The ring tone volume for incoming calls increases gradually. When you
hear the ring tone (on the headset), there are 2 ways to answer the
call:
• Short press the
CTRL
button on your headset once.
• Say loudly any word of your choice (e.g.: ‘Yes’ or ‘Answer’). If you
do not utter any word within 15 seconds after hearing the fi rst
ring-
tone, the call will be automatically rejected and the headset will stop
ringing.
Terminating calls
To end a call, keep pressed the
Intercom
button of the driver’device
for some seconds, a beep tone will confi rm the termination. If the other
party terminates the call fi rst, you don’t have to do anything.
Phones without handsfree protocol require pressing
CTRL
button,
to terminate the calls
Call reject
While you hear the ring tone on the headset, there are two ways you
can reject the call:
• Press the
Intercom
button on your headset.
• Remain silent for 15 seconds.
Long press here to
terminate the call
Press here to reject
the call or initiate redial
Press here to answer
the call