Midland BIZTALK BR200, Руководство пользователя

Страница: 13 / 20

Model BR200
midlandusa.com Page 13
• While Scan Function is active the Green LED will flash to indicate
that the radio is scanning�
3� After stopping on an active channel, Scanning will resume once there
has been 4 seconds of no activity on the channel�
4� To reply to a received transmission when the Scan Mode is enabled,
press and hold the PTT button (on radio or headset accessory) while
the radio is paused on the active channel, the radio will then transmit
on the active channel’s frequency�
• The radio will remain on the active channel for 4 seconds after the
PTT button is released�
5� To transmit on the frequency selected by the Channel Knob while Scan
Mode is enabled, the user will verify that the radio is not receiving a
transmission, then press PTT button (on radio or headset accessory)�
• Once the PTT button is released the radio will go back into
scanning after 4 seconds of inactivity�
6. To exit Scan Mode, the user will Long Press (≥ 3 seconds) the Scan
Button�
• The radio will emit a single beep, alerting the user that the radio
has exited Scan Mode�
PRIVACY CODES
CTCSS (Continuous Tone Coded Squelch System) and DCS (Digitally Coded
Squelch) are systems that allow several users to share the same channel without
disturbing each other� With CTCSS or DCS enabled, the channel is muted to all
incoming signals unless they carry the correct CTCSS or DCS tone� When a
transmission with the correct tone is received, the channel un-mutes and the voice
audio can be heard� When the transmission ends the channel becomes muted
again� Transmissions that do not have the correct tone will not be heard�
Your BR200 Series radio has 142 Privacy Codes, which are available on any
channel� The selected Privacy Code may be different for each channel�
Privacy Codes can only be set using the programming software� This
software can be downloaded from the midlandusa�com website�
Note : If you select a
CTCSS
Privacy Code, any pre-selected
DCS
Privacy Code will be cancelled and vice-versa�