Base Tech II Base/Repeater Station Operator’s Manual
10
•
Keypad Operation using the [SHIFT] Key
Some of the Base Tech II Base Repeater's features and related functions can be changed by using the [SHIFT]
key. To make these changes, it is necessary to first press the [SHIFT] key followed by the other keys within a
two second timeframe.
The following key sequences are used for the purposes described:
[SHIFT]+[0]
Toggles the tone system between 5-Tone signaling and DTMF signaling
[SHIFT]+[1]
Switches the LCD back-light to the ON or OFF position
[SHIFT]+[2]
Toggles the transmitting power between High power and Low power
[SHIFT]+[3]
Invalid Key
[SHIFT]+[4]
Toggles between "Single Tone Encoding" mode and "5-Tone" or "DTMF" signaling
mode
[SHIFT]+[5]
Invalid Key
[SHIFT]+[6]
Enters the KILL mode to allow entry of the KILL password
[SHIFT]+[7]
Displays the programmed information for the selected (active) channel in the LCD
display
[SHIFT]+[8]
Locks or Unlocks the Base Tech II Base Repeater's Keypad
[SHIFT]+[9]
Toggles the Base Tech II Base Repeater between "Normal Channel Scanning"
mode and "Priority Channel Scanning" mode
[SHIFT]+[A]
Restores a channel to the Channel Scanning List. (The user must first select the
channel to be restored as the active channel)
[SHIFT]+[B]
Invalid Key
[SHIFT]+[C]
Indicates to the Base Tech II Base Repeater that you have entered the last number
of a DTMF encoding sequence
[SHIFT]+[D]
Invalid Key
[SHIFT]+[
•
]
Deletes the active channel from the Channel Scanning List
[SHIFT]+[#]
Will attach the "R-Number" data to the active encode number and transmit the
whole sequence
[SHIFT]+[CH]
Will start or stop the display of the TX and RX bar graphs in the LCD display
[SHIFT]+[SCN]
Will place the Base Tech II Base Repeater in the Program Scan mode or exit from
the Program Scan mode
[SHIFT]+[MON]
Invalid Key
