Manual ALAN 95 D80 (neue Produktion), 09.11.2004, 15:51, Kirsten Kunter
7."H/L" button
I
t selects the output power level during trasmission.When the unit is tur ned on, it always
transmits with high power (4W). By pressing this button, the unit will transmit with low
power (1W ). The display will shows "LOW". Press again the H/L button to return to
"HIGH" power level.
8."AM/FM'' button
To select AM mode or FM mode
9. Save button
It activates the save function of the unit for energy saving task.(the display will
shows"P")
10. DUAL Watch button
Push this button for first time will put the current channel as „watch channel“. Pushing
the button again will enable the DW. Disable by pushing this button for third time.
11. M1-Button
This button allows 1 channel to be memorised when needed.
12. LIGHT button
Display lighting (temporised).This function allows to operate in darkness conditions.
13."Channels UP" button
To skip to the next channel. Keeping this button pressed, the "autorepeat" function is
obtained.
14. "Channel DOWN"
To skip to the previous channel. Keeping this button pressed, the "autorepeat" function
is obtained.
15."LOCK"
button
It allows you to lock the keyboard, thus av oiding accidental use of the keys.
16. Loudspeaker
17. Microphone
During transmission, keep your mouth 4 cm far from the unit, and speak with a normal
tone of voice to the microphone.
18."SP." jack
External loudspeaker jack(the internal loudspeaker is excluded).
19."PTT/MIC" jack
PTT jack / external microphone jack
20."13.8V DC CHARGE"
Power supply/charge jack. You can charge the unit from external sources: car battery,
boat battery etc.)
21. Push to talk button ("PTT")
By pressing it, the transmitter is activated . When released it, the receiver is activated.
22.Battery compartment
Insert 9 Nicd alcaline batteries
23. Belt clip
How to operate with your transceiver
1. Insert the antenna in the antenna connector.
