background image

 

1

SP-220, 230, 240,250 series

 

Synthesized Scanning Radio 
 

 FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE 
ONLY 

The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 
1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy 
emitted by FCC regulated equipment. Maxon subscribes to the same safety standard for the use of its 
products. Proper operation of this radio will result in user exposure far below the Occupational Safety and 
Health Act (OSHA) and Federal Communications Commission limits.

  

 

DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more than 
50% of the time can cause FCC RF exposure compliance requirements to be exceeded. 

This radio is NOT approved for use by the general population in an uncontrolled 

environment. This radio is restricted to occupational use, work related operations only 
where radio operator must have the knowledge to control the user’s exposure conditions for 
satisfying the higher exposure limit allowed for occupational use. 

When transmitting, hold the radio in a vertical position with its microphone 2 inches (5 cm) 

away from your mouth. 

The radio is transmitting when the red LED on the front of the radio is illuminated. You can 

cause the radio to transmit by pressing the PTT bar on the radio. 

These are required operating configurations for meeting FCC RF exposure compliance. 

Failure to observe these restrictions mean violation.

 

 

 

Operating  
Instructions 

 

 

About Your SP-220, 230, 240, 250 series Radio

 

 

Midland Radio Corporations Maxon brand SP-220, 230, 240, 250 series  radio feature a 4 or  16  channel  rotary  switch. 
Operation and functions for the SP-220, 230, 240, 250 series are described in this manual. 
 

We urge you to thoroughly read this manual before operating the radio. 
 

Application of some of the functions described in this manual is determined by the system you use. Your Dealer will program 
your radio so that you have the greatest number of functions possible relative to your needs. Should you have questions regarding the 
operation of the radio please consult your Dealer. 
 
 

 
 
 
 
 
 
 
 
 
 

Содержание SP-220 Series








Отзывы: