midiplus BK492, Руководство пользователя

Страница: 10 / 14

MIDIPLUS Co, Ltd. http://www.midiplus.com.tw
8
Actually the Bank Select message is the MIDI Controller messages, just like
Volume, Pan, Sustain Pedal, Wind, and other controllers. Specifically, the
controller number for the "Most Significant Byte" (i.e., MSB) of Bank Select is
controller "0" The controller number for "Least Significant Byte" (i.e., LSB) of
Bank Select is controller "32". The data of these messages is the bank number
you want to select. (Sometimes the MSB Bank Select is referred to the rough
adjustment, and the LSB Bank Select is referred to the subtle adjustment).
2.2.5 Transpose
The "Octave UP&DOWN" Buttons can be used to transpose your keyboard.
Some players want to play in a particular key like C or F, for example.
Transpose lets you change the pitch you are controlling and continue to play in
the key that is most comfortable for you.
It is possible to transpose up or down by as much as 12 MIDI notes (or
semitones). This means if you press one of the transpose Buttons 12 times, the
tone will sound exactly one octave higher or lower.
To do the Transpose, you need to do as follows:

Press the "MODE" Button and the LED under the button will light on.

Press the "Transpose" Button.

Use "DATA ENTRY" Knob or move “Octave UP & Down" Buttons to
select a desired number.

Press the "MODE" Button again (LED lights off) to save the edit.
2.2.6 Controller Select
The Control Select function (CTRL SEL) will allow you to begin.
Programming the controller channel, the knobs, sliders, trigger pads and
transport, Sustain pedal, Data Entry and Modulation wheel. In order to change
the value of each controller, you need to do as follows:

Press the "MODE" Button and the LED under the button will light on.

Select the controller you want to edit by pressing or turning.

Tum the "Data Entry" Knob or press the "Octave UP & Down" button to
choose the control number you want to edit. You can see the Control
Number on the LCD screen.

Press the "Next" Key to set the channel.

Turn the "Data Entry" Knob or Press the "Octave UP & Down" button to