6
Store on COR/Store on VOX:
Note: If connecting to a portable radio then VOX will most likely have to be used,
as most portable radios do not provide a COR indication. Select the appropriate method that the unit should use
to come out of power save.
COR Hold-Up Time
This is the amount of time after loss of COR/VOX that the unit considers COR/VOX dropped.
VOX Settings > Sensitivity:
This is a threshold detection based on the energy level in the audio.
VOX Settings > Attack Time:
This sets the minimum time before the unit will detect VOX based on the sensitivity
setting.
VOX Settings > Decay Time
: This sets the time before the unit will drop the VOX detection. Be certain to set this
long enough so that you do not have drop outs between words or on brief pauses.
Beep Options > Power Up:
Enables a short beep sequence that takes place immediately after power-up.
Beep Options > Error:
This beep may be triggered by any input event if programmed to do so. For example, if a
long press on the Mode Input is not assigned to a function, it may be configured to generate the error beep.
Beep Options > Mode:
This is used to indicate to the user when a mode has been enabled or disabled.
Voice Compression:
If checked the VM-3 can store up to 3-minutes of voice. If left unchecked the VM-3 can
store up to 2.25 minutes of voice, but with a higher level of audio quality.
