7
CONTROLS & INDICATORS
Power Switch:
In the up position the VAE-10 is on.
Power LED:
This red LED indicates that power is applied to the unit and that the switch is on.
COR LED:
This yellow LED indicates that the VAE-10 is receiving a busy indication from the radio.
PTT LED:
This green LED indicates that the VAE-10 is applying push to talk to the radio.
CH ACQ LED:
This red LED indicates that the radio has acquired a channel on the trunk system and it is okay for
the VAE-10 to retransmit the page.
DTMF LED:
Future Use.
Validate LED:
Future Use.
Speaker Microphone:
The speaker mic has three buttons; PTT, Button 1 and Button 2. The PTT button is the larger oblong button,
Button 1 is the top round button with one nub and Button 2 (not used) is the bottom round button with two nubs.
PTT Button:
The PTT button is used to send a PTT command to the radio to cause the radio to transmit, as well as send the
ANI, Emergency ANI and recorded voice messages.
Button 1 and Button 2:
Button 1 is a momentary button that can be programmed for Record Start, Record Stop/Play or Record
Stop/Start. The functions can be selected by a short press, long press (press and hold for 1 second) or double
press.
