Midian Electronics SVR-1-KW3, Руководство пользователя

Страница: 4 / 20

4
HARDWARE INSTALLATION
Be certain to follow standard anti-static procedures when handling any of Midian’s products. Due to the design of
the radio it is necessary to install a PTT wire from the SVR-1-KW3 to the Kenwood radio.
PTT: In order to be able to automatically key the radio it is necessary to install a wire from the point shown in the
picture below to a point in the radio as discussed in the installation instructions for the desired model radio below.
Kenwood NX-200 & NX-300 :
Connect the PTT wire above to the CN702 PTT2 pad shown below. Plug the unit into the options connector
(CN710) located behind the options door under the battery.
Kenwood NX-700 & NX-800 :
Connect the PTT wire to J901 Pin 5 PTT/TXD as show below or to an assignable pin on the DB25 connector.
Plug the unit onto the options connector CN-595.
SVR-1-KW3 PTT Pad
PTT wire to CN702 PTT2
PTT Wire to J901 Pin 5 PTT/TXD