Midian Electronics ANI-F Maxon Скачать руководство пользователя страница 2

 

2

positions are correct, plug the Midian board onto the 
options connector labeled CON404, and then 
reassemble the Maxon radio. 
 

LK # 

Factory 

ANI-F 

LK1 Out  Out 
LK2 Out  Out 
LK3 In  In 
LK4 In  Out 
LK5 In  In 
LK6 Out  In 
LK7 Out  Out 
LK8 Out  Out 
LK9 Out  Out 
LK10 Out  Out 
LK11 In 

In 

LK12 Out  Out 
LK13 In 

In 

LK14 In 

In 

LK15 Out  Out 
LK16 Out  Out 
LK17 In 

In 

LK18 Out  Out 
LK19 Out  Out 

 
 
It will also be necessary to insert LK2 and remove 
LK4 in the front panel if using the auxiliary switch for 
Emergency ANI. 
 
 

HARDWARE ALIGNMENT 

 

For the TX Audio Output in a wide band system, set 
the ANI modulation pot R12 to 3.3 KHz (66% of 5 
KHz) of deviation per EIA specifications.  For the TX 
Audio Output in a narrow band system, set the ANI 
modulation pot R12 to 1.65 KHz (66% of 2.5 KHz) of 
deviation per EIA specifications. 
 
 

RADIO PROGRAMMING 

 
Other than the link positions noted under hardware 
installation, no special programming is necessary. 
 
 

TECHNICAL NOTES 

 
Portable Radio Emergency ANI:
  The transmission 
of the Emergency ANI is accomplished with the 
momentary options button, the bottom side button. 
 
Mobile Radio Emergency ANI:  The transmission 
of the Emergency ANI is accomplished with the 
latched auxiliary button.  Since it is a latched button, 

it will be necessary to push the auxiliary button again 
to ready the button for another emergency. 
 
Common/Non-Common PTT:    If  Common  PTT  is 
to be used, it will be necessary to insert LK4 and 
program the ANI-F for common PTT. 
 
SP-300 Alert Tone:  In the SP-300 Series, it may be 
necessary to install a wire from the ANI-F Maxon’s 
Pin 7 (Alert Tone) to the radio’s + speaker terminal. 
 
 

OPERATION 

 
ANI Encode:  When the PTT Input is grounded, the 
unit will assert the PTT Output and send the 
programmed ANI tones out the TX Tone Output. 
 
ENI Encode:  When the Emergency Input is 
grounded, the unit will assert the PTT Output and 
send the programmed Emergency ANI tones out the 
TX Tone Output. 
 
 

MIDIAN CONTACT INFORMATION 

 

Midian Electronics Inc. 
2302 East 22

nd

 Street 

Tucson, Arizona 85713 USA 
 
Orders: 1-800-MIDIANS 
Phone: 520-884-7981 
Fax: 520-884-0422 
E-mail: 

[email protected]

 

Web: 

http://www.midians.com/

 

Отзывы: