use parameter #2149 (chapter 5.2.23). It works exactly like the one described
here, but additionally it remembers last position in nonvolatile memory, so it will
use the same value after next power-up.
5.2.14
Native Instruments B4 chorus/vibrato -
#2140
Turning this pot will be reflected in B4 as "chorus/vibrato"
switch move. It has only 6 positions, and appropriate command
will be sent from MBBS to B4 every time the potentiometer
crosses each threshold representing another vibrato/chorus
mode. The circuit on the right shows proper B4 connection.
5.2.15
MidiTzer stops control - #2141
When assigned to a keyboard, each key becomes specific stop
controller. When a key is pressed, MIDI controller 81 (51 hex) is sent, and when it
is released, MIDI controller 80 (50 hex). Value of the controller is determined by
the button pressed. This is default way of controlling stops in MidiTzer organ
software.
5.2.16
Ahlborn Archive module stops control - #2142
If assigned to a keyboard, each key becomes stop control in Ahlborn Archive organ
sound-module. When a key is pressed, MIDI controller 73 (49 hex) is sent, when
released, MIDI controller 74 (4A hex). Value of the controller is determined by the
button pressed. This is default way of controlling stops in Ahlborn Archive module.
5.2.17
Ahlborn Organs stops control - #2143
When assigned to a keyboard, each key becomes specific stop controller in Ahlborn
Organs. When a key is pressed, MIDI controller 70 (46 hex) is sent with bit 6 of the
value set, and when it is released, the same MIDI controller but with bit 6 of the
value cleared. Other bits of the value are determined by the button pressed. In
another words, pressing the button sends CC 70 with value range 0-63, and
releasing a button - CC 70 with value range 64-127. This is default way of
controlling stops in Ahlborn Organs.
5.2.18
Program
selector - #2144
Together with another pot configured
as in 5.2.19 this mode allows to
select one of 120 available MIDI
Program Changes (presets) by use of
2 rotary switches. Program selector
selects one of 12 Programs within a
bank. For better feel, you should
rather use 12-position rotary switch.
To do so, use the following
14
