16
Part Name: 1
–
door switch assembly 2
–
absorber 3
–
4
–
backboard
Removal and Replacement
1. Disconnect power supply.
2. Remove shell. (see
shell
removal and installation)
3. Unfit snap of door lock assembly, and push it out.
4. Pull out all terminals of microswitch fixed on the door lock assembly.
5. Reverse the above procedure to install. And check out all connectors connected well.
Removal and Replacement
1. Remove
shell
.
(see
shell
removal and installation)
2. Take out
absorbing cotton
,
upper basket
and
lower basket
.
3. Contrarotate nut of air breaker and take out it.
4. Pull out terminal of air breaker, and unfit snaps of air breaker fixing on softener.
Door Lock Assembly
Air breaker
1
2
3
4
Snap
Locking terminals
clamps
