rod
by the notch, lifting the rinse dispenser
plunger
and releasing the rinse agent. When
deactivated, the lever returns to its original starting position.
The magnetic sensor
is connected
to rinse aid warning light at control panel by wires. When the indicator lights up, it should add
more rinse aid.
Part Name: 1 – cover catch 2 – detergent power compartment
3 – cover 4 –sight glass
5 – rinse agent cap 6 – detergent tablet compartment
Part Name: 1 – electromagnetic valve 2 – lever
3 – plunger 4 – connecting rod
5 – magnetic sensor
Removal and Replacement
1. Remove outer door assembly. (see
outer door
removal and installation)
2. Pull out all terminals of dispenser. Then remove all screws for fixing dispenser.
Part Name: 1 – dispenser brackets 2 – dispenser
5. Reverse the above procedure to install. And check out all connectors connects well.
Removal and Replacement
1. Disconnect power supply.
2. Remove outer door assembly. (see
outer door
removal and installation)
3. Unfit all snap-fits of outer door assembly for fixing
microswitch (door handle assembly). And pull out
microswitch (door handle assembly).
Note
: Don’t pull out all terminals of microswitch (door handle assembly)
Door Handle Assembly
5
1
2
3
4
6
4
1
2
3
5
2
1
Screws
Locking terminals