Midea VCS2, Руководство пользователя

Страница: 18 / 20

Figure 13 Figure 12
Figure 14
ON/OFF
MODE
3-3. Install accessories (hanging ironing head, brush head, small scraper, scouring
head, etc.):
Align the sliding notch on the accessory with the latch on the straight nozzle and
push in. Then rotate the accessory until the latch enters the notch, which
indicates it is installed in place, as shown in Figure 12, Figure 13.
3-4. Modes and operation in handheld state:
Preheating Mode: Check according to the precautions and make sure
everything is under normal condition. Insert the plug into the socket, and the red
light on handle will flash, indicating that the machine enters preheating mode;
Standby Mode: About 15 seconds after entering preheating mode, the red
light will turn on, indicating that the machine switches to standby mode;
High-flow Steam Mode: When the machine is in standby mode, press the ON/OFF
button, the blue light in the right will turn on, indicating that the machine
switches to high-flow steam mode (the steam button must be locked);
Low-flow Steam Mode: When the machine is in high-flow mode,
press the ON/OFF button, the blue light on the right will
turn off , and the blue light in the middle will turn on,
indicating that the machine switches to low-flow
steam mode; When the machine is in low-flow
steam mode, press the ON/OFF button again,
all the blue lights will turn off, and the machine
will return to standby mode.
Please see Figure 11 for the position of ON/OFF button.
Note: When the machine is used in handheld state, the steam button must
be locked, otherwise no steam will be ejected.