replace with a new bag. (Fig1)
Open the front cover by clipping. (Fig2)
Take out the bag then remove the full dust bag. (Fig3)
2.
Exchange the outlet filter: clip down and remove the outlet cover by hands for exchange of
filter. (fig4,5,)
3.
The motor protection filter should be cleaned or exchanged after it is dirt.(Fig6,7)
Warning
The plug must be removed from the power socket before any maintenance or replacement.
If the power cord is damaged, replace them only by the factory or maintenance center or
similarly qualified persons.
Maintenance
1.
Change the dust bag: when the wind indicator turns to be red, it is time to clear the dust or
1
2
3
4
5
6
7
Common Fault Exclusion
Fault Phenomenon
Possible Reason
Processing Method
VC does not work at all
Suction abate
1. Power plug was not
plugged into the socket
2. Out of power
3. Switch does not open
1. Replug into the socket
2. Check circuit breaker
3. Turn VC on
1. Main brush or accessory
suction head is blocked
2. Dust in the bag was too full
3. Inlet filter is blocked
1. Clean up the blockage
2. Clean or replace dust bags
3. Clean or replace the filter
Содержание VC-15C189
