11
Operating the Remote Controller
2) Press each time to change the operating mode according to the order shown in Figure 3.5;
3) In Auto, Cool, Dry or Heat mode, press ▲ and ▼ to adjust the temperature setting. Press ▲ and ▼ to adjust the
temperature by 1°C (default). Long press to change the temperature continuously.
Note:
• Fan speed cannot be adjusted in the Auto and Dry modes.
• Temperature setting cannot be adjusted in the Fan mode.
1) 7 fan speeds: The default in the remote controller is the mode with 7 fan speeds, where the Fan Speed will be
adjusted in turn as shown in Figure 3.7;
2) 3 fan speeds: Fan Speed will be adjusted in turn as shown in Figure 3.8.
Note: the default fan speed is 7 fan speeds, please refer to Field Setting to adjust the default fan speed.
In Cool, Heat or Fan mode, press to set the operating fan speed (see Figure 3.6).
Auto Cool Heat Dry Fan
Figure 3.5
Figure 3.6
Figure 3.7
Figure 3.8
Auto
Auto
Low
Mid
High
Speed 1
Speed 3 Speed 4 Speed 5
Speed 6
Speed 7
High
5.3 Fan Speed Operations
Speed 2
