Midea NT20-21A, Инструкция по эксплуатации

Страница: 14 / 15

Problem Possible Cause Solution
After the power is engaged,
the power indicator light
does not illuminate and the
machine does not work.
The plug may not be plugged
well.
Check whether the plug is
properly inserted into the
receptacle.
The temperature control
knob is not turned in place.
Check whether the
temperature control knob is
turned to the ON position.
The machine suddenly stops
during heating.
The temperature exceeds
the threshold of the thermal
Cool the machine before
use.
TROUBLESHOOTING
6
CLEANING AND MAINTENANCE INSTRUCTION
Light accumulated dust may be removed from the heater with a soft cloth.
Wipe the exterior surfaces of the heater occasionally with a cloth moistened
(not dripping wet) with a solution of mild detergent and water. Dry the case
thoroughly with a soft dry cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further
lubrication.
3. No other user maintenance is required orrecommended. If service is required,
send your heater to the nearest autho rized servicedepot.
4. Store heater in a clean and dry place whennot in use. REMEMBER - portable
electric heaters are designed for spot heating, or as a supplementary heat
source. They are not intended to be main sources of heat during the normal
heating season.
Portable electric heaters are designed for spot heating, or as a supplementary
heat source. They are not intended to be main sources of heat during the normal
heating season.
PRODUCT SPECIFICATION
Model
Low
High
Power regulation range
NT20-21A 1200W 2000W
Power
supply
220-240V~
50/60Hz
192x120x260mm
1.07kg
Product size
(LxWxH)
Net
weight