HEAT OPERATION
(cooling only models without)
Press the "MODE" button until the
"HEAT" indicator light comes on.
Press the ADJUST buttons "+" or " - "
to select your desired room temperature.
The temperature can be set within a
range of 62
℉
-88
℉/
17
℃
-30
℃
.
Press the "FAN SPEED" button to
choose the fan speed. For some models,
the fan speed can not be adjusted under
HEAT mode.
Press the "MODE" button until the
"DRY" indicator light comes on.
Under this mode, you cannot select a fan
speed or adjust the temperature. The fan
motor operates at LOW speed.
Keep windows and doors closed for the
best dehumidifying effect.
Do not put the duct to window.
AUTO OPERATION
When you set the air conditioner in
AUTO mode, it will automatically select
cooling, heating(cooling only models
without), or fan only operation
depending on what temperature you
have selected.
and the room temperature.
The air conditioner will control room
temperature automatically round the
temperature point set by you.
Under AUTO mode, you can not select
the fan speed
TIMER OPERATION
When the unit is on, press the Timer
button will initiate the Auto-off stop
program, the TIMER OFF indicator
light illuminates. Press the UP or
down button to select the desired
time. Press the TIMER button again
within 5 seconds, the Auto-on start
program is initiated. And the
TIMER ON indicator light
illuminates. Press the up or down
button to select the desired Auto-on
start time.
When the unit is off, press the Timer
button to initiate the Auto-on start
program, press it again within five
seconds will initiate the Auto-off
stop program.
Press or hold the UP or DOWN
button to change the Auto time by
0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24
hours. The control will count down
the time remaining until start.
The system will automatically revert
back to display the previous temper-
ature setting if there is no operation
in a five seconds period.
Turning the unit ON or OFF at any
time or adjusting the timer setting
to 0.0 will cancel the Auto Start/
Stop timer program.
When the malfunction (E1,E2,E3
or E4) occurs, the Auto Start/Stop
timed program will also be cancelled.
