Page 6
Saf
ety
Pr
ecautions
WARNING - Prevent Accidents
To reduce the risk of fire, electrical shock, or injury to persons when using your air
conditioner, follow basic precautions, including the following:
• Be sure the electrical service is adequate for the
m
odel you have chosen. This
infor
m
ation can be found on the serial plate, which is located on the side of the
cabinet and behind the grille.
• If the air conditioner is to be installed in a window, you will probably want to clean
both sides of the glass first. If the window is a triple-track type with a screen panel
included, re
m
ove the screen co
m
pletely before installation.
• Be sure the air conditioner as been securely and correctly in stalled according to
the installation instructions in this
m
anual. Save this
m
anual for possible future use
in re
m
oving or installing this unit.
• When handling the air conditioner, be careful to avoid cuts fro
m
sharp
m
etal fins
on front and rear coils.
The power supply cord contains a current device that senses damage to the power
cord. To test your power supply cord as follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST
button, you will notice a click as the RESET button pops out.
3. Press the RESET button, again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products
this it also indicated by a light on the plug head.)
NOTES
• Do not use this device to turn the unit on or off.
• Always
m
ake sure the RESET button is pushed in for correct operation.
• The power supply
m
ust be replaced if it fails reset when either the TEST button is
pushed, or it can not be reset. Please contact Custo
m
er Service.
• If power supply cord is da
m
aged, it can not be repaired. It MUST be replaced with
a new cord - please contact Custo
m
er Service.
Operation of Current Device
