background image

!

CAUTION

Make sure vacuum cleaner is turned off and not 

plugged into a power source.

WARNING: 

Do not attempt to remove belt.  

24h 

4.  Click dust cup back into place on unit.

3.  Reattach filter and Cyclone.

3. Shake to remove dust. 

2. Press other end into slot.
3. 

How to maintain brushroll

To avoid unnecessary service calls, periodically check brushroll for debris. If brushroll gets clogged 

it will automatically shut off. Turn vacuum off and unplug before attempting to remove clog.

1. Press

2. Pull out

1. Press

2. Pull out

 Replace brushroll release tab into slot and press down  

to click it into place.

24h 

How to maintain your vacuum cleaner 

CAUTION 

Never operate vacuum 

3. Press

 

in proper position. 

WARNING: 

Moving parts! 

Recharge cleaner after  
each use. 

If debris cannot be removed easily, locate the brushroll release 

tab on the right side and open the brushroll cover. Remove the 

brushroll and clear any tangled hair and remaining debris.

Dust cup – Empty after each use 

Click the dust cup release button, located 

on the front of the handle just above the 

dust cup and pull dust cup out.

Press lever to release bottom lid of dust cup 

to empty debris.

Washable brushroll – clean frequently 

To reassemble:

dust frequently. Every three months 

1.  

 

Click the dust cup release button, 

located on the front of the handle 

just above the dust cup and pull dust 

cup out.

2. 

Содержание MVC-V18P








Отзывы: