2
Please turn off the power and
3-way ball valve if the unit will
be long- term unused. Dispense
water for 3 to 5 mins and then
reuse it.
The unit equipped with full-auto
water producing system, it starts
to producing water or flush
automatically When the unit is
not used for a long time. This
phenomenon is normal
There should be one 110-240V
power outlet for the unit within
the scope of 1.85m, And make
sure power outlet and adapter
locate in the interior to prevent
humid weather.
Please don’t turn off the
power or plug out the
power cord frequently.
It’s normal that there will be
slight noise and vibration
when the unit is producing
water.
The flow rate will be reduced
when the environmental
temp gets lower. This is the
inherent feature of RO
membrane.
The unit may catch
fire or be damaged,
and cause circuit
failure when it is
installed close to
strong magnetic
device.
The place with too much
dust and humidity may
cause circuit damage.
1.85m
Install the unit as
close as possible
to the floor drain
