7
5. Child lock Function
To Lock: press " " and "
" simultaneously for 3 seconds, there will be a long " beeping " sound
and the "
" will be illuminated.
Lock quitting: press "
" and "
" simultaneously for 3 seconds, there will be a long " beeping
"sound indicating the child-lock is released.
6. Reminder Function
This function will help to remind you to start cooking in a certain time from 0:01 to 9:59.
Only when oven in standby mode, the reminder can be set. Follow below to set the reminder:
1> Press reminder setting button "
";
2> Rotate " K2 " to set the hour time of reminder. (Time should be within 0--9).
3> Press reminder setting button "
" again;
4> Rotate " K2 " to set minute time of reminder. (Time should be within 0--59).
5> Press "
" to confirm setting. The time will count down.
Note: The oven buzzer will sound 10 times when set reminder time is reached.
You can cancel the reminder during setting by pressing the stop button; After the reminder has
been
set, you can cancel it by pressing stop button twice.
7. Start/Pause/Cancel Function
1> If the cooking time has been set, press "
" to start cooking. If the cooking is paused, press
"
"
to resume cooking.
2> During cooking process, press "
" once to pause the cooking. Press "
" twice to cancel the
cooking.
8. Energy-Saving Function
1> In waiting state and reminding state, press "
" for three seconds, the LED display
will go
off
and set to energy-saving mode.
2> If no operation in 10 minutes under waiting state, the LED display will go off and go into energy-
saving
mode.
3> Under the energy-saving mode, press any key or rotate any knob can quit the energy-saving
mode.
9. Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
1> Rotate "K1" to select the pyrolytic function. LED display will show "PYR".
2> Press "
" to confirm the cooking. And the default time is 2 hours. LED display will show "PYR".
3> Rotate "K1" to change the pyrolytic time. The timer can be set 1:30 or 2:00 hours.
Note:
A) When the oven door is
, pressing start button will be invalid. LED display will show
"DOOR", "PYR".
( )
( )
open
