Disassembly of kettle lid
Care and cleaning
Reminder
• Before cleaning, please ensure the power plug has been disconnected
and the electric water kettle has been cooled down.
• To extend the lifespan of the electric water kettle, please clean the mineral
deposits (scale) inside the kettle, you may apply cleaning agent (such as
vinegar, citric acid) to clean.
• There might be a minor odour after each cleaning, you may fill the kettle
with cold water, boil the water few rounds and drains off the water to
remove the odour.
• Do not rinse the kettle exterior with water, do not use steel balls, chemical
or powdering detergent to clean the exterior.
• Use water-containing sponge to wipe the liner, do not use detergent
powder, grass brush or nylon brush.
• Do not dry the kettle with dishwasher or dryer, otherwise the kettle will be
deformed and damaged
Press the “Unlock” button, the unlock
indicator light is on, and the water outflow
function is available.
Open the lid of the kettle, the lid and the
horizontal level are at 20~30 degrees.
Hold the kettle body with one hand and
pull lid slightly with the other hand to remove
the lid.
During installation, the rotating shaft of the
lid is to be aligned with the clamp position on
the body of the kettle, and inserts the lid at
20-30 degrees at the horizontal level.
When you hear a click sound, the lid is
installed in place.
Unlock
Daily maintenance
Unplug the power cord.
9
