background image

15

TROUBLESHOOTING GUIDE

If the clothes washer does not perform as expected, malfunctions

,

 or an alarm is 

sounding, please check the following list of possible solutions.
If a solution can not be found or the problem persists, please contact Midea service (refer 
to page 17). Do not, under any circumstance, dismantle the appliance yourself.

Troubles

Reason

Solution

Washing machine 
will not start up

·

Check if the door is closed tightly.

·

Check if power plug is inserted correctly.

·

Check if water supply tap is opened.

·

Check if button “Start/Pause” is pressed.

·

Check if button “Power” is pressed.

Door will not open

·

This is the machine’s safety 
protection.

·

Disconnect the power, wait a few minutes, 
door will then open.

Heating fault

·

Heating element damaged.

·

Can only wash without heat.

·

Contact the service centre promptly.

Water leakage

·

The connection between inlet pipe 
or outlet hose and tap or washing 
machine is not tight.

·

Drain pipe is blocked.

·

Check and fasten water pipes.

·

Clean up outlet hose

.

·

Arrange

 

a

 

service

 

person to repair if

 

necessary.

Water overflowing 
from bottom of 
machine

·

The inlet hose is not connected 
firmly.

·

Drain hose has a leakage.

·

Fix the inlet hose

 

in

 

place

 

securely.

·

Replace the drain hose.

Indicator or display 
does not light

·

Power is disconnected.

·

PC board has problems.

·

Harness has connection problem.

·

Check if the power is shut down  and power 
plug is connected correctly. If not, please 
contact

 

customer

 

care.

Detergent residue in 
the dispenser

 

drawer

·

Washing powder is dampened and 
agglomerated.

·

Clean and wipe the drawer.

·

Use liquid detergents or detergents 
especially for front load

 

washers.

Poor washing effects

·

The clothes are heavily

 

soiled.

·

Insufficient detergent quantity.

·

Select appropriate

 

wash

 

program.

·

Add the proper detergent quantity according 
to instructions on

 

the detergent package.

Abnormal noises

 

and

 

vibrations

·

Check if the transit bolts have been 
removed.

·

Check

 

if installed on solid and level floor.

·

Check

 

if

 

the

 

feet

 

of

 

the

 

washing

 

machine

 

are

 

leveled

 

correctly

.

·

Check for hair clips or metal articles inside

 

the

 

drum.

Содержание MFWS512





















Отзывы: