Midea MFA-12HRN1, Общее руководство пользователя

Страница: 39 / 60

MCAC-UTSM-2009-03 Installation Place
Installation 37
1. Installation Place
1.1 The indoor Unit
5.
There is enough room for installation and maintenance.
6.
The air outlet and the air inlet are not impeded, and the influence of external air is the least.
7.
The air flow can reach throughout the room.
8.
The connecting pipe and drainpipe could be extracted out easily.
9.
There is no direct radiation from heaters
1.2 The Outdoor Unit
1. There is enough space for installation and maintenance.
2. The air outlet and the air inlet are not impeded, and can not be reached by strong wind.
3. The place is dry and ventilative.
4. The support is flat and horizontal and can stand the weight of the outdoor unit. And no additional noise
or vibration.
5. Your neighborhood will not feel uncomfortable with the noise or expelled air.
6. There is no leakage of combustible gas.
7. It is easy to install the connecting pipe or cables.
Caution:
Don’t install the air conditioner in the following locations:
a. There
exists petrolatum.
b. There is salty air surrounding (near the coast).
c. There is caustic gas (the sulfide, for example) existing in the air (near a hot spring).
d. The Volt vibrates violently (in the factories).
e. In buses or cabinets.
f.
In kitchen where it is full of oil gas.
g. There is strong electromagnetic wave existing.
h. There are inflammable materials or gas.
i.
There is acid or alkaline liquid evaporating.
j. Other special conditions
1.3 Notes before Installation
1. Select the correct carry-in path.
2. Move this unit as originally packaged as possible.
3. If the air conditioner is installed on a metal part of the building, it must be electrically insulated according
to the relevant standards to electrical appliances.