· Water can be automatically emptied into a floor
drain by attaching the unit with a water hose(not
included).
· Remove the rubber plug or cut
the cover down from the back
drain hose outlet. Attach a
drain hose and lead it to the
floor drain or a suitable
drainage facility.
· Make sure the hose is secure
so there are no leaks.
· Direct the hose toward the drain,making sure that
there are no kinks that will stop the warter flowing.
· Place the end of the hose into the drain and make
sure the end of the hose is level or down to let the
water flow smoothly. Do never let it up.
· Make sure the water hose is lower than the drain
hose.
· Select the desired humidity setting and fan speed
on the unit for continuous draining to start.
2. Continuous draining
Note: When the continuous drain feature is not
being used,remove the drain hose from the outlet
and reinstall the rubber plug.
Note:
· When you remove the bucket, do not touch any
parts inside of the unit. Doing so may damage the
product.
· Be sure to push the bucket gently all the way into
the unit. Banging the bucket against anything or
failing to push it in securely may cause the unit
not to operate.
· When you remove the bucket, if there is some
water in the unit you must dry it.
Page 17
Operating
Instructions
2. Hold both sides of the bucket with even strength,
and pull it out from the unit.
3. Pour the water out.
Attach the hose to the drain
hose outlet.
Remove the
rubber plug
