4. Tap the filter against a dustbin to remove most of the dust and then
wash the filter in cold running water until the water runs clear. Allow
to air dry fully. Using a damp or wet filter will reduce the suction and
damage the motor.
5. The filter assembly can also be washed under running water if needed.
6. When the filter and assembly are completely dry, reverse the above
steps and refit the filter into the dust container and close the flap.
7. To clean or replace the post-motor filter, turn the cover anticlockwise and
lift off the cover(fig. 19), remove the filter(Fig.20), wash and dry the filter
in accordance with step 4.
8. Refit the filter and cover onto the cleaner.
Fig. 18
Fig. 19
Fig. 20
MAINTENANCE
Содержание MCS1825WB
Страница 2: ......