26
Filter cleaning
Caution! Make sure the splash shield is installed
correctly before use of the microwave oven!
Filter Filter screws
The front filter serves as the air inlet; the filter should be cleaned on time to keep the
chamber clean.
• Turn counterclockwise to unscrew and take down the filter ; and wash it with warm
soap water;
• Install the filter screen Tighten clockwise the screws to fix the filter ;
• Make sure the filter is installed before use of the microwave oven;
• The factory setting has the function to remind the user of washing the filter every 30
days.
Splash shield cleaning
• Detaching: Hold the two buckle positions in front of the splash shield with your hands
(as shown by the arrows). Exert your strength following the direction of the arrows
and pull downwards after you have pulled out the buckles:
• Wash the splash shield:
• Installation: Pick up the splash shield and obliquely put it into the chamber in the
way that insert the first pin at the rear into the positioning hole on the rear plate of
chamber, then push the other side to insert all positioning pins into their positioning
holes.
Содержание MCM1817G1F
Страница 31: ......
Страница 32: ...www mideahk com Midea HK...