Timer
When the cooker is in standby or working mode, the
"Timer" button is pressed the "10 minute" light comes
on. Set the desired time by pressing the timer button
and the time set will increase in the sequence 20, 30,
60, 90 and finally the maximum 120 minutes. The timer
range is 10 minutes -120 minutes.
After the set time has been reached, the appliance will
turn off.
To cancel timing during the count down, press the
timer button until reaches the "120 min" light, press
once more and the timer will clear itself.
"120" indicator
flashes
"keep warm" &"120 "
indicator flash
"140" indicator
flashes
"Keep warn"
indicator flashes
"120"&"140"
indicator flash
Keep warm & "120"
&"140" indicator flash
"160" indicator
flashes
"Keep warm"& "140"
indicator flashes
Keep warm & "120"
&"160" indicator flash
"140"&"160"
indicator flash
Code
Failure
Code
Failure
Open circuit (abnormality
of the main transducer)
Short circuit (abnormality
of the main transducer)
High temperature (abnormality
of the main transducer)
Low voltage protection
High voltage protection
Open circuit (abnormality of the
transducer of the heat sink)
Short circuit (abnormality of the
transducer of the heat sink)
Invalidation of the main
transducer
High temperature (abnormality
of thetransducer of the
heat sink)
fan failure
5
Note: Don't put the empty pot on the ceramic plate. Put the
pot which has water or food on the center of the ceramic
plate. If there is no pot or no suitable pot on the center of the
ceramic plate, after the buzzer sounds one minute, the cooker
will shut down automatically, and return to the state of "OFF".
When the cooker is in standby mode, you can press
"+" or "-" button to start, then you can press the "+" or
"-" buttton to arrange the temperature.
Shut down
Press the "ON/OFF" button in the standby state or working
state, the buzzer will sound and the cooker will in off mode.
Failure and Protection Code:
If anything unusual happened, the induction cooker will enter into
protection mode automatically and display corresponding protection code.
