background image

Page 3 

Saf

ety

Pr
ecautions

Safety Precautions

Please read through these instructions before you start the installation process.  
Improper installation can cause damage to the unit and/or personal property and 
can be a personal safety hazard.

• Installation must be performed according to the installation instructions.

Improper installation can cause water leakage, electrical shock, or fire.

• Use only the included accessories and parts, and specified tools for the

installation. Using non-standard parts can cause water leakage, electrical shock,
fire, and injury or property damage.

• Make sure that the outlet you are using is grounded and has the appropriate

voltage. The power cord is equipped with a three-prong grounding plug to
protect against shock. Voltage information can be found on the side of the unit,
behind the grille.

• Install the unit on a flat, sturdy surface. Failure to do so could result in damage

or excessive noise and vibration.

• The unit must be kept free from obstruction to ensure proper functioning and to

mitigate safety hazards.

• DO NOT modify the length of the power cord or use an extension cord to power

the unit. DO NOT share a single outlet with other electrical appliances. Improper
power supply can cause fire or electrical shock.

WARNING

CAUTION

  

This symbol indicates the possibility of death or serious injury.

WARNING

This symbol indicates the possibility of injury or damage to property.

This symbol shows that the operation manual should be read carefully.

This symbol shows that a service personnel should be handling this
equipment with reference to the installation manual.

This symbol shows that this appliance uses a flammable refrigerant.
If the refrigerant is leaked and exposed to an external ignition source, 
there is a risk of fire.

WARNING

CAUTION

CAUTION

CAUTION

This symbol shows that information is available such as the operating
manual or installation manual.

To prevent injury to the user or personal and property damage, these instructions must 
be followed. Incorrect operation due to ignoring of instructions may cause harm or 
damage. The level of risk is shown by the following indications.

Содержание MAP08R1CWT

































Отзывы: