Midea M2OD-14HFN1-Q, Руководство по обслуживанию

Страница: 34 / 65

9.
Electronic control function
9.1 Abbreviation
T1: Indoor ambient temperature
T2: Coil temperature of indoor heat exchanger middle.
T2B: Coil temperature of indoor heat exchanger outlet.
T3: Coil temperature of outdoor heat exchanger
T4: Outdoor ambient temperature
T5: Compressor discharge temperature
Ts: Setting temperature
9.2 Electric control working environment.
9.2.1 Input voltage: 198V~264V.
9.2.2 Input power frequency:50Hz.
9.2.3 Indoor fan normal working amp. is less than 1A.
9.2.4 Outdoor fan. Normal working amp. is less than 1.5A.
9.2.5 Four-way valve normal working amp. is less than 1A.
9.3 Outdoor unit
’s digital display tube
There is a digital display tube in outdoor PCB.
Digital display tube display function

In standb
y , the LED displays “- -”

In compressor operation, the LED display the running frequency,

In defrosting mode, The LED displays “dF” or alternative displays between running frequency and
“dF”(each displays 0.5s)

In compressor pre-heating, The LED displa
ys “PH” or alternative displays between running frequency
and “PH”(each displays 0.5s)

During the oil return process,
The LED displays “RO” or alternative displays between running
frequency and “RO”(each displays 0.5s)

In low ambient cooling mode, th
e LED displays “LC” or alternative displays between running
frequency and “LC”(each displays 0.5s)

In forced cooling mode,
the LED displays “FC” or alternative displays between running frequency and
“FC”(each displays 0.5s)

When PFC module protection occurs three times within 15 minutes,
the LED displays “E6” or
alternative displays between running frequency and “E6”(each displays 0.5s)

In protection or malfunction, the LED displays error code or protection code.