Midea l712wmb16 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 38

Midea l712wmb16 Скачать руководство пользователя страница 9

3.TROUBLESHOOTING

P.09

Before entering into service mode, make sure no water remains in the inner drum, if not, select drain
only program to drain them out.
Turn on the machine and

in 30s.

Press

or

to select test program. Press

button to confirm your selection

and start the selected test. If you want to go back to test selection interface, press the

button to

cancel previous selection.

3.2.1 Version switchover (t01)

1) Enter into service mode, LED displays “t01”
2) Press

button, LED displays “0xx”.x means current version.

3) Press

to confirm switchover.

4) Press

or

to change version.

5) Press

button continuously for 3s to confirm your change.

6) Press

button to close all output and exit this program. LED displays “t01”.

3.2.2 Error code checking (t02)

1) Enter into error code mode, LED displays “Err”. Press

button and LED displays

EXX(x=1,2,3….)
2) Press

to show the last code and press

to show the next code. The latest 10 error codes

can be found in system, and same error code is recorded one time even if it occurs more than one time
3) If no error information found, LED shows E00.
4) Press

and

button at the same time continuously for 3s, after hearing the beep, all the

error codes records deleted, LED displays E00.
5) Press

button to exit, LED display t02.

3.2.3 Version information checking (t03)

Version information checking is used to show the current version information stored in nonvolatile
memory applications.
1) Enter into service mode, LED displays “cod”.

3) Press

button, LED displays version number.

4) Press

to go back to version information checking status, LED display “t03”.

3.2.4 UI Checking (t04)

1) Press

button to illuminate the whole LED display.

2) Press

button, the whole LED display flashes.

3) Press

to stop flash, LED display “t04”

take turns [K2] [K4] [K2] [K4] buttons

[K2]

[K3]

[K5]

[K5]

[K5]
[K4]
[K2]

[K3]

[K4]
[K5]

[K5]

[K2]

[K3]

[K2]

[K3]

[K5]

[K5]
[K2]
[K5]

[K5]
[K5]
[K5]

2) Press

, LED displays project number.

3.2 Sevice mode

Start/Pause

K1

K2

K3

K4

K5

«
...
7
8
9
10
11
...
»

Содержание l712wmb16







































Отзывы:

Нет отзывов