Cabinet
Frame
Operation When Objects Are Dropped Into the
Outside of the Spin Tub
1
.
Remove all screws on the frame with a screw driver and
loosen the connector of the brake belt .
2
.
Pull up the frame with both hands and turn it backwards.
3
.
Take out the clothes dropped into the outside of the spin tub.
4
.
Fasten the connector of the brake belt ,Press the frame to
reset and tighten screws.
3
.
Fit the water inlet hose and turn on the water tap to
confirm water filling and draining work properly.
MAINTENANCES
If the Following Symptoms Occur, Please Disconnect The Power Plug And Perform
The Following Checks:
Check that the power supply is in good condition.
Check that the power plug is inserted properly.
●
●
●
Check that the wash timer knob or the spin timer knob is not
in the "0" position.
Check that the drain hose is not laid too high.
Check that the drain hose is not frozen.
Check that the drain hose is not blocked by foreign matter.
●
●
●
Check that there are no coins or any other foreign objects
dropped into the wash tub.
●
Check that the washing machine is placed on flat, stable floor.
Check that clothes are evenly distributed in the spin tub.
Check that there are no washing materials or foaming debris
dropped into the outside of the spin tub.
●
●
●
The washing
machine does
not work.
The drain hose
does not work.
There is abnormal
noise during washing.
There is abnormal
noise and violent
vibration during
spinning.
Symptom
Reason
13
Trouble Shooting
