10
09
Faults Handling
Please confirm the following contents before the entrusted maintenance
Notes
Faults
Troubleshooting
Service Guide
The display screen shows "E1"
The display screen shows "E0"
The display screen shows "Eu"
The display screen shows "E3"
The purifier is not working
The purifier has a small amount
of air and is noisy
The air outlet smells odor
Whether the wheels are pulled
out after inserted
Whether the purifier can be used
with the humidifier
Disassembly protection tips; Please assemble the air inlet grills and air outlet grills properly.
Hardware faults; Please contact the after-sales office.
Sensor faults; Please contact the after-sales office.
The speed is beyond control; Please contact the after-sales office.
Firstly, check whether the power cord is plugged into the power socket; the loose plug caused by the movement of the purifier may affect the
energizing; Secondly, check whether the air inlet grill and air outlet grill of the purifier are assembled properly. This appliance is provided with a
disassembly protection function. If the air inlet grill and air outlet grill are not assembled properly, the product cannot work.
Firstly, check whether the foreign bodies block the air inlet grill and air outlet grill; if any, remove those foreign bodies; Then, check whether the
Pre-Filter becomes dirty or reaches the end of its service life; if any, clean the Pre-Filter; Finally, check whether the HEPA filter is full of dust or
reaches the end of its service life; if any, the replacement of the HEPA filter is required.
When the appliance is operated for the first time, it smells slightly plastic, which is normal; If this appliance works in places (like smoking area or
rotisserie, etc.) with strong smell for a long time, you need to change the filter element frequently and reset it. Check whether the air inlet/outlet grill
and Pre-Filter are full of dust or dirt; if any, maintain the appliance and clean the dust and dirt on the air inlet/outlet grill and Pre-Filter.
Yes, tilt the machine at a small angle and pull them out with a little effort. If not, try to pull the wheels out while rotating them.
The wet environment has a greater impact on the filter element, and the mist produced by the ultrasonic humidifier may cause abnormality in the
PM2.5 detection of this appliance, so that simultaneous operation is avoided as much as possible.
Product parameters
Model
Rated power
Rated power
CADR (particulate matters)
Purification energy efficiency rating of the particulate matters
Noise
KJ500G-TB32
220-240V
35W
500m
3
/h
Efficient level
< 56dB
The various performance parameters in the table are measured in the factory and for reference only.
If the appliance is modified, the parameters may be changed, and please be subject to the parameters on the
nameplate.
Purification principle: The fan of the air purifier draws air into the body for filtrating through the built-in filter element,
which plays a main role in filtering the dust (like PM2.5, etc.), formaldehyde, odor, sterilization and so on.
Содержание KJ500G-TB32
Страница 1: ...Operating Manual Air Purifier ...