10
2 8
MAINTENANCE
•
Note!
Description
Reason
Solution
R
Check if clothes are stuck.
Clean the outlet hose.
estart after the door is closed
Door is not closed properly.
Door cannot be
Washer's safety protection
design is activated.
Disconnect
the
power.
PC board or wire harness
has connection problem.
Check if the power is shut
down and if the power plug
is connected correctly.
Check if the transport bolts
have been removed
Check if it is installed on a
solid and level oor.
opened
Disconnect the power, restart
the product.
Water leakage
The connection between inlet
pipe or outlet hose is not tight.
Check and fasten water pipes.
Clean and wipe the detergent
box.
Abnormal noise
Indicator or display
does not light up
Washing machine
cannot start
Detergent residues
in the dispenser
Detergent is damp or lumpy.
Alarm indication
Wate
problem during
washing
Reason
Solution
Check if the water pressure is
too low.
S
Check if the inlet valve
is blocked.
traighten the water pipe.
Check
if
the
drain hose is blocked.
Others
Water overflow
Restart the washer.
Restart after the door is closed
Check if the clothes is stuck
Door is not closed properly
a solution to the problem. If there is none, contact the service center.
Draining exceeds time limit.
Try to look for a solution again
then call for service if none is found
After
checking, turn on
the
appliance
.
If
the
problem
occurs again
,
contact
a service center.
Troubleshooting