background image

8

2.4  Start to use

The cooler shall stay for half an hour before connecting power when it is firstly

 

 started.
Clean up the inner chamber before put into use for first time .
Do not connect cooler to electronic energy saving plug and converter that can 
convert DC into  AC (E.g.: solar energy system, ship grid).
Water drop or frost will be generated on backside of 

Wine Cooler

 when compressor is 

running, which is decided by function of cooler. wiping out frost or water drop is not 
needed as the back

 

will wipe them out automatically. The defrosted water will be collected 

into drain tank, then inflow into water disposal pan above the compressor and vaporized.

2.3  Placement

 

2.6 Usage of temperature zones  inside

 

the

 

Wine Cooler

2.7 Energy

 

saving

 

tips

Do not let bottle touch the cooler's back in order to maintain good air circulation in the cooler.
The bottle number may be different from bottles in different shape and size.Oversized bottle may have impact 
on the number of bottle storage in the beverage cabinet. 

2.5 The arrangement of bottle

higher than the low area.

heat

s

The top space of the cooler
shall be greater than 30cm,and 
the distances from bothsides 
and backside shall be more 
than 10cm to facilitate heat 
dissipation.

Before using the cooler,remove 
all packaging materials including
 bottom cushions and foam pads
 and tapes inside the cooler,tear 
off the protective film on the door
 and the cooler body.

Avoid direct sunlight and heat 
sources sunch as stove,heating
 radiator,etc.If the cooler has to 
be put next to heat source,a
 suitable insulation board shall be
 applied or keep the cooler away
 from heat source.

The cooler is placed in a 
well-ventilated indoor place;the
 ground shall be

 

flat,and sturdy

(rotate left or right to adjust

 

the

 wheel for levelling if unstable).
The more refrigerant in the 

Wine 

Cooler

, the larger the space in

 

 which 

the 

Wine Cooler

 should be

 

 placed. 

Every 8g of refrigerant must

 

 have at 

least 1m3 of heat dissipation

 

 space. 

The amount of refrigerant 
is indicated on the nameplate on the 
back of the 

Wine Cooler

.

Содержание FP-20RWC096LMNV-T1 Series














Отзывы: