1. Unfold the package and take out the air cooler, put it on the ground.
2. Check out the spare part.
3. Install the universal wheels: Take out the universal wheel and install them on the air cooler.
(Fig.1)
5. Check the power cord to find whether it is same with the rating label.
Attention: Do not connect the power cord with a wet hand.
When connect the power cord, please make it contact well.
When remove the machine, please pull out the power cord.
4. Watering: Pull out the water tank from the body about 1/3, and pour water into the
water tank. If you want to remove the water tank only do so when the power has been
switched off for a minimum of 2 minutes.
Attention:
Pay attention to the water line when watering.
When watering, the water must not be higher than the“MAX”water line. When
humidifying, the water must not be lower thanthe “MIN” water line.
If need to increase the cooling effect, can put the frozen ice box into the water tank.
(Fig.2)
Control panel
Wheels
Fig.2
Fig.1
4
Water tank
Add water and
Frozen ice box
ON/OFF
TIMER
NATURAL
SPEED
OSC.
ION
EVA. /
COOLER
INSTALLATION AND USE
KEY CONTROL
