![background image](http://html1.mh-extra.com/html/midea/a1-4-5kg/a1-4-5kg_service-manual_1791747026.webp)
P.26
Operation step
Picture
4.UNPACKING WAYS OF MAIN PARTS
23 Undo the absorber
Lift out the outer tub kit
(means as 21 above).
Undo the absorber pin
between absorber and rear
tub, remove the absorber.
①
②
24 Undo the motor
First let the machine lie
down on the back and then pull
out the motor wire and
grounding wire. Use spanner to
remove the motor screw, and
lift up the motor with the other
hand in case of falling to the
drain pump
①
.
After two screws are
removed, change the motor.
First support it to clasp the
correct position, then install
the screws, and then install the
belt
②
.
减震器销
密封条
Pin
Airproof Ring
Remove the screws
fixing the front and rear
tub, and then remove the
Remove the inner drum kit.
⑤
⑥
tub.