4.6 Switch on the power
source
,
press
the
“start/pause” button
,
This might caused by the fault of door lock, make
the
PCB
board detected that the door is open
4.7 The dryer is running, open
the
door
but
the
dryer
still
running.
4.8 When the dryer is running,
the air volume of outlet was
little
.
1.Check
whether
the
inlet
was
obstructed
;
keep
the
freely
flowing
of
air
inlet
;
2.Check
whether
the
filter
was
obstructed
,
get
it
out
and
cleaned
.
4.9 The dryer keep running a
long
time
while
drying
fewer
clothes.
It is suggest to you take the 1 hour program. If it still cannot solve the problem, please check
4.10 The drum of the dryer cannot rotate efficiently
.
The dryer cannot work efficiently when you put the clothes of rated capacity. It may be caused by the questions
:
;
And
then
the
weak
belt
make the
drum
of the dryer cannot
rotate
efficiently. In
this
case, please replace the belt
2.The extenuation of the spring of the pulley spring leads to the weak force of pulley
.
This
can
also
3.Because
of
the
faulty
connection of the capacitor, the motor cannot work normally;
4.11 When you find the cabinet have current in the using process
.
You should check it drain current or faradic current. It is very dangerous if it caused by drain current.
It is usually
caused by some electrical parts are short-circuited or damaged by moisture or the wire's
insulative parts touch
the metal parts under the fracture, etc. It is the faradic current if you find the
electroprobe light when you put it on the
dryer's cabinet. In this case, please check the dryer grounded. or not. You should check it and exclude it
4.12 The key doesn't work under the normal condition
.
The dryer's key doesn't work under the normal condition, it may be caused by the questions
:
1.The
button
is
droped
or
dislocated
;
2.The
key
of
the
control
panel
is
partly
damaged
;
3
.
The
key
of
the
PCB
board is broken
.
This might caused by the fault of door lock, make
the
PCB
board
detected
that
the
door
1.Due
to
the
belt had
been
fretted
away flabbily and the
wedge
type is damaged,.the
belt
works skidded
.
4.Maybe
the
capacitor is aged. In
this
case, please replace the capacitor
.
4.PHENOMENON OF THE FAULT
the
dryer
doesn
'
t
work but alarm
.
Analysis and maintenance
:
Analysis and maintenance
:
and alarmed, replace
the
door
switch.
Analysis and maintenance
:
Analysis and maintenance
:
Analysis and maintenance
:
Analysis and maintenance
:
Analysis and maintenance
:
is
closed
,
replace
the
door switch
.
the thermostat and replace it after you are sure the thermostat is error
.
make
the
belt
skidding and
the
drum
of
the
dryer
cannot
rotate efficiently
.
In
this
case, please replace the pulley spring
;
- 11 -