Midea 65C series, Руководство по обслуживанию, Страница: 27 / 39

24
6.6 Disassembly of convection motor, turbo heating element
WARNING: Turn off the electrical power supply to the appliance prior to servicing it.
Failure to disconnect the power supply during service may result in an electrical
shock or fire hazard.
Step 1: Remove the door from oven (please refer to Point 6.3.1), and put it horizontally on
the table.
Step 2: Disassemble the control panel cover and control panel back cover (please refer to
Point 6.4.1 step 1).
Step 3: Disassemble the
back cover (please refer to Point 6.5).
Step 4: Use a screwdriver to remove the screws on the back of the cavity inside to
disassemble the
convection motor cover , and then pull it out from the clipping hole.
Step 5: Use a spanner or a nut-driver to rotate the nut on the convection motor clockwise so
that the nut be taking out, and then take the
fan blade and washer out of the convection
motor.
Step 6: Disconnect the wires on the convection motor. For the sake of reassembly
convenience, please mark the connection positions before moving the wires. Remove the
screws fixed the convection motor.
Screw
Clipping