9
Boil-dry Protection
User Maintenance Instructions
Care & Cleaning Instructions
Descaling
A safety thermostat will automatically turn the kettle off whenever the unit is
without sufficient water, or if the kettle is allowed to boil dry. To reset the
boil-dry protection device, remove the kettle from the power base and allow
it to cool before refilling with water.
This appliance requires little maintenance. It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassembly
must be performed by a qualified appliance repair technician.
1. Make sure the kettle is unplugged and completely cool.
2. Grasp the handle and remove the kettle from the power base. If
necessary, wipe the inside and outside of the kettle with a soft, damp
cloth and wipe dry.
3. Wipe the power base with a damp cloth.
4. Make sure both the power base and kettle are completely dry after
cleaning and before use.
1. Several descalers are available. Follow the instructions provided .
2. As an alternative, use the white vinegar cleaning method:
• In a spouted bowl, prepare a descaling solution of 3 cups white vinegar
and 2 cups cool, clean water; pour into kettle. Do not boil the solution, as
Always unplug kettle and allow to cool before cleaning. Never immerse
kettle, power base, cord, or plug in water or other liquids. Never use scour-
ing pads or harsh cleansers to clean your kettle as they may damage the
surface.
CAUTION:
Note:
Mineral deposits can form a scale coating inside the kettle and may cause
an off flavor in the water or lengthen the boiling time.