Midea 350105, Руководство пользователя, Страница: 6 / 11

Using The Blender
Crushing Ice
Care and Maintenance
Blade Unit
5
.
22.Switch off (0) and unplug before cleaning.
23.W ash the jug,lid and cap in warm soapy water ,rinse well,drain,
and air dry.
24.Wipe the outside of the motor unit with a clean damp cloth.
25.Don’t put any part of the appliance in a dishwasher.
26.You may remove the blade unit for cleaning.
27.This is best done with the jug upside down.
28.Grip the jug handle with one hand.
29.Grip the bottom of the blade unit with the other hand.
30.T urn the blade unit clockwise till it comes loose from the jug base.
14.Lower the jug on to the motor unit, then turn the jug clockwise, to
lock it in place.
15.Pull the lid up and of f the jug - it’ s stiff, because of the seal.
16.Put the ingredients into the jug - don’t fill past the max mark.
17.Put the lid on the jug, and push it down to seal it.
18.Align the pips on the cap with the slots in the hole, fit the cap in
the hole, and turn clockwise. Don’t rut the blender without the cap.
19.To add ingredients while the motor is running:
a)turn the cap clockwise to unlock it, and lift it off
b) add the ingredients via the hole
c)replace the cap and turn it anti-clockwise to lock it
20.Start with half to threequarters of a cup of ice, or 4 to 6 cubes,
and add 15ml (1 tbsp) of water.
21.Put the lid on the blender, then turn the speed control to P for a
second or so, check the state of the ice, and repeat till the
ice is the consistency that you need.