Midea 22033010000441, Руководство по обслуживанию

Страница: 28 / 42

Service Manual , 2016-12
28 / 42
9. Function and operation
9.1operation panel

Powering on each time, the display screen gives a full display for 3s and the start-up sound rings;
then the panel displays normal.

Normal display
Display area lighten all the time: If the system has an error, the area display relevant error code.
Otherwise, temperature is on.
9.2Temperature control

Standby mode
●By pressing the lock for 3s in non-locking mode, the buzzer rings and the locked mode is
activated. Meanwhile, all loads stop working and the display panel extinguishes.
●By pressing the lock (for 3s or not) in locking mode, the buzzer rings and the non-locking
mode is activated. Meanwhile, all loads start working and the display panel
shows setting
temperature

Lighting mode
●Press the Lighting mode key to turn on or turn off the light.

Temperature setting
●Press the Temperature-rise key , the temperature will increase 1
℃
(or 1
℉
). After15s,
the cooler will operate according to the setting temperature;
●Press the Temperature-drop key , the temperature will decrease 1 ℃
(or
℉
). After
15s, the cooler will operate according to the setting temperature
●The beverage cooler‘s temperature can be setted between 1~10
℃（
33~50
℉）
Memory function
●The cooler has the power off memory function. When power on again, the wine cooler
will operate according to the setting mode before power off.

Switching of the Fahrenheit temperature and Celsius temperature
●
Press the Temperature-rise key and the Temperature-drop key at
the same time for 3s to finish the switch of the Celsius temperature and Fahrenheit
temperature; the screen will display the Fahrenheit temperature or Celsius temperature under
the current mode.

Fault indication
●If the indication of the following table is displayed on the display area, it means the
cooler is with faults.