1. Turn
counterclockwise to unscrew and take the filter ; and wash it warm
soap
water;
2.
3. Make sure the filter is installed before use of the microwave oven;
4. The factory setting has the function to remind the user of washing the filter every 30
days.
(6) Splatter shield cleaning
1. Detaching: Hold the two
s in front of the spla
shield with your
hands (as shown by the arrows).Push the tabs following the direction of
the arrows and pull downwards after you have pulled the
s:
2. Wash the splatter shield,rinse,sanitize,allow to dry.
3. Installation: Pick up the spla
shield and put it into the chamber in
the way that insert the
at the rear into the positioning hole on the rear
plate of chamber, then push the other side to insert all positioning pins into their
positioning holes.
Filter cleaning
23
Caution! Make sure the splash shield
is installed correctly before use of the
microwave oven!
Filter Filter screws
off
in
filter screws
tab
tter
pins first
in
tab
and
rinse,sanitize,allow to dry.
tter
The front filter serves as the air inlet; the filter should be cleaned regularly, depending on the
kitchen conditions.
Install the filter screen, tighten the screw to
4.Push the front of the splatter up to set the tabs in their corresponding position.
Filter screws
Arrows
clockwise
