P
Mode
.
OPERATION INSTRUCTION
16
rogramming
10
2) During this mode, remaning cooking time displays. The fan and oven lamp will light.
If you press " " button under this mode, the oven will enter Pause Mode.
3) When cooking program finishes, the oven will enter End of Cook Cycle Mode.
Each press of " "can increase the cooking time by 30 seconds.
You can also press
to adjust the power during
" "," "," " or " "
the cooking.
START
STOP
.
1) Open the door and press " " for 5 seconds, the beep tone will sound once and enter to
Programming Mode.
2) "ProG"
display.
3) Turn the " " to choose one number for the program, the LED will display the number
4) Press
to input the
LED will display the related power. If the same button pressed twice, the power
will change to full power. If no power chosen, full power is default.
When the program saved, "ProG" displays.
" " to save the program, the buzzer will sound three times briefly to tell you the time is
set before will remain.
5) After setting the time and power, press " ", the cooking program will be saved.
6) If all the cooking time exceeds the MAX.time User Option 7, then press
" "," "," " or "
"
for 2 seconds.Then turn the " " to choose the cooking time.
power leverl.
START
START
7) Close the door, the oven will turn back to Ready Mode.
The program that is not saved will be lost . If the program saved as
memory procedure,
choose the related number and press " ", the saved program will start.
START
This mode allows the user to assign cook times and power levels to the once touche button.
LED will display the related power. If the same button pressed twice, the power
will change to full power. If no power chosen, full power is default.
Press " " to enter Ready Mode.
1) The user may manuallly enter a cook time and power level while in this mode.
2) While the oven is in the Ready Mode,turn the" " to choose
the cooking time.
3) If you press " "," "," " or " " button to select power level,
4) During setting process, press " " to enter Manual Cook Mode.
Manual Cook Entry Mode
START
STOP
9.
appears in the
incorrect. hen LED returns to show "ProG". The time
T
in the