Page 5
TECHNICAL SPECIFICATIONS
Dimensions
Weight
Battery
Operating Temperature
Operating Relative
Humidity
2U Rack: 17.05 In. x 3.5 In. x 18.9 In.
(43.3 cm x 8.8 cm x 48 cm)
70.5 Lb. (32 kg.)
Sealed maintenance free lead acid
battery (12V/9.0 AH x 8)
32 F to 104 F (0 C to 40 C)
o
o
o
o
0 to 95% non-condensing
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference that
may cause undesired operation.
WARNING!! This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
PRODUCT CHARACTERISTICS
VALUE/MEASUREMENT
NOTE: The battery pack should be located directly below the UPS in the rack in order to connect the
48 VDC output cable to the UPS as shown in Figure A. If installing the battery pack and the UPS
is located in the bottom of the rack, the UPS should be moved before installing the expansion
battery pack.
INSTALLATION AND MOUNTING
1) If using the provided handles install them now
using provided 8-32 screws. (FIGURE A)
NOTE: The handles cannot be installed
after the unit is rack-mounted.
FIGURE A
RACK EAR
RACK EAR
SCREW (6X)
2) Install ears as shown using provided 10-32 screws.
Six screws per ear, one ear per side.
