Page 4
NOTE:
Middle Atlantic Products provides a clamp for use on non-rackmount equipment. On equipment
that is rackmounted, clamp is not required and can be discarded.
Choose a desired location for clamp and assemble clamp to ears using screws and nuts provided
(See
FIGURE D
). Slide clamp brackets securely down on equipment and tighten. Adjust stop bars to
secure rear of equipment
FIGURE D
CLAMP
BRACKETS
STOP
BARS
EARS
CLAMP ASSEMBLY
OPTIONAL ACCESSORY:
UNIVERSAL CONNECTOR PANEL
For Middle Atlantic Products UCP modules (used to mount commonly used connectors), see
middleatlantic.com for details. To install, remove blank panel and install re-using hardware provided.
NOTE:
Some of the UCP panels may need to be mounted on the surface of the faceplate.
