DRAWER SLIDE INSTALLATION (CONTINUED)
DRAWER INSTALLATION
Page 5
1. Slides (B) are marked as (L) and (R). Install the slide assemblies into the mounting holes and secure
in place using (2x) hex nuts (D) each side. Tighten down using supplied nut driver and handle (C).
(FIGURE B)
NOTE:
Slide stop bumpers must face inside
frame when installed.
1. To install storage drawer (A), align slides and using some force. Push drawer in completely to fully
lock in place.
2. Move the drawer in and out to ensure drawer slides freely.
(FIGURE C)
B
D
C
D
A
Frame cut away
for clarity
FIGURE B
FIGURE C
