Page 5
HINGE
10-32
SCREWS
FIGURE C
1) Install the supplied D-Rings to the pre-installed rackrail on both sides of the rack as shown with the
supplied hardware.
(FIGURE B)
2) Reverse the door to install to the opposite side of the rack. Install the two (2) 10-32 screws to the top and
bottom hinges.
D-RING
RACKRAIL
8-32 ACORN
NUT
FIGURE B
8-32 STUD
1) Remove the two (2) 10-32 screws from both top and bottom hinges to remove the door (remove 4 screws total).
(FIGURE C)
D-RING INSTALLATION
STANDARD DOOR SWING REVERSAL
